A胶 - 江西省惠昌时代胶粘剂有限公司
  • 产品展示
  • 雷竞技网站
  • 封口胶
  • 防水防潮粘合剂
  • 裱糊胶水
  • 裱纸胶粉
  • 人才招聘
  • 联系我们
  • 产品演示视频
  • 产品详细
    A胶

    本品系采用优质的合成乳液、热塑性弹性体、增粘树脂、多种助剂,经过严格的科学配方和先进的生产工艺精心制作而成的一种高性能粘胶。

    外观:乳白色粘稠状液体

    适用范围:本品适用于贴窗、上油磨光、纸/纸、膜/纸的UV强力粘接,也适用于精品盒中纸、膜、中密度板之间的合面与粘接。

    产品特性:

    1:涂刷性能好,干燥速度较快;胶膜柔韧,对覆膜面的附着性好,粘接强度大。

    2:本品抗冷耐热性能佳,粘合好的产品在75℃烘烤72小时或-30℃冷冻72小时粘接强度保持不变,产品不爆,胶膜不发脆。

    施工方法:喷涂、手刷、机糊通用胶

    技术参数:固含量≥55%/ 粘度=12000-13000mpa.s/  PH=5-6

    使用注意事项:

    1、施胶后要求稍微凉置,凉置时间视被粘接件厚薄和气温情况而定,一般为2-6分钟。

    2、对于挺度太大的产品,粘合后要求至少压榨半小时,并且压力要足够,使两被粘面能够充分贴合。

    3、使用本品的产品质量涉及诸多因素,用户应在使用前视产品的具体情况进行试用合格后方可批量生产。

    贮存运输:

    1、本品应密封存放于阴凉干燥通风处,贮存温度为5-35℃为宜,有效贮存期为一年,超过贮存期如检验合格仍可使用。

    2、本品为水分散体,属于非危险品,可按普通物品办理运输。

    免责条款

    由于货品的使用、操作、贮存以及运输等均不受本公司操控,本公司对货品的使用性能、效果及适用性均不负责。本公司的任何职员或代表均无权改动或放弃本条款,如贵公司未能接受此项免责条款,请将货品原装退回。

     


    This product USES the high quality of synthetic latex, thermoplastic elastomer, viscosity resin, a variety of additives, through strict scientific formula and advanced production technology of elaborate a high-performance viscose.

    Appearance: Milky white viscous liquid

    Applicable scope: This product is suitable for UV strong adhesion of paper/paper, film/paper, and also suitable for the joint surface and adhesion between paper, film and medium density plate in the fine box.

    Product characteristics:

    1: good brushing performance and fast drying.The adhesive film is flexible, good adhesion and strong adhesive strength.

    2: Cold heat resistance, adhesion good products at 30 75 baking 72 hours or - frozen 72 hours remain the same bonding strength, product does not burst, film is not brittle.

    Construction method: spray, brush, machine paste general glue

    Technical parameters: the solid content 55% / viscosity =12,000-13000mpa. s / PH = 5-6

    Use caution:

    1,After the glue, the request is slightly cool, and the cooldown time is determined by the thickness and temperature of the adhesives, usually 2-6 minutes.

    2,For the products that are too large, the glue will be pressed for at least half an hour, and the pressure will be enough to make the two sides glued together.

    3,The product quality of the use of this product involves many factors, the user should inspect the specific situation of the product before the use of the product to be able to mass-produce.

    Storage transportation:

    1,This product should be sealed store in a cool and dry ventilated place, storage temperature for 5 to 35 advisable, effective storage period is one year, more than storage period such as inspection qualified can still use.

    2,It is a non-dangerous product which can be transported by ordinary articles.

    Disclaimer:

    The company is not responsible for the performance, effect and applicability of the goods due to the use, operation, storage and transportation of the goods.No staff or representative of the company has the right to amend or waive this clause. If your company fails to accept the exemption clause, please return the original shipment.